Ward Electronics.  

Ever wondered what your receiver output is really doing. This unit will measure the pulse width of your system.

Check end point adjustment, check linearity, check for noisy sticks, check trim adjustment, check stick reverse switch, etc.

Plugs directly into your receiver and displays the output from the system on 11 LEDs. The centre LED should be lit when the stick is in the centre position, 1.5mS. Move the stick in one direction or the other and the LEDs will light in 0.1mS steps; up or down depending on the direction of the sticks movement .

For more information email David at info@wardelectronics.co.uk